Electrocube, design manufacturer of electronic components
Contact Online or Call (800) 515-1112
Electrocube Data Sheets
Electrocube Data Sheets

226 Series High Voltage Polyester Capacitors

Capacitor Product Data Sheet

no-border no-border

The unique high performance and long life characteristics of polyester account for the varied applications of this miniature capacitor series.

These capacitors feature extended foil construction and standard tin coated copper-clad steel leads. Nickel, copper, dumet and other special leads are available.

Protective clear wrap is offered on all wrap and fill units. Please add .010” to maximum diameter dimension for protective clear wrap. The potting material and endfills of Electrode’s capacitors meet or exceed the flammability requirements of UL94VO.

Specifications for 226 Series High Voltage Polyester Capacitors




Temperature: -55ºC to +85ºC at rated voltage.
Dielectric Strength: Will withstand 125% at voltage and 25ºC for a period not to exceed
1 minute; current limited to 5 mA.
Life Test:Will withstand rated voltage for 2000 hrs. at +40ºC
with not more than 1 failure in 12 permitted.
Dissipation factor:Shall not exceed 1.0% at 25ºC.
Acceptance Criteria:Measurement frequency for capacitance and dissipation factor
shall be 1000Hz for values to 1 mfd; 120Hz. For values of 1 mfd and up.
Insulation Resistance: At 500V, units shall meet the minimum values below:
Temperature (ºC) MEG x MFDS MEG (NEED NOT EXCEED)
2000V - UP 2000V - UP
25 40,000 80,000
85 4,000 8,000

NOTES:

For information regarding insulating sleeves, mountings, special terminals non-standard leads, circuit connections and other hardware, please consult factory.

For styles and ratings not shown, or for unusual requirements necessitated  by special circuit applications (including higher IR or lower DF), consult the factory direct.   


All Electrocube film capacitors have endfills and tape that
meet or exceed the flammability requirements of UL94VO.

*Add tolerance designator to complete part number: J= ±5%, K= ±10%, M= ±20
*Add tolerance designator to complete part number: J= ±5%, K= ±10%, M= ±20
*Add tolerance designator to complete part number: J= ±5%, K= ±10%, M= ±20
*Add tolerance designator to complete part number: J= ±5%, K= ±10%, M= ±20
*Add tolerance designator to complete part number: J= ±5%, K= ±10%, M= ±20
*Add tolerance designator to complete part number: J= ±5%, K= ±10%, M= ±20
*Add tolerance designator to complete part number: J= ±5%, K= ±10%, M= ±20
*Add tolerance designator to complete part number: J= ±5%, K= ±10%, M= ±20
*Add tolerance designator to complete part number: J= ±5%, K= ±10%, M= ±20
*Add tolerance designator to complete part number: J= ±5%, K= ±10%, M= ±20
*Add tolerance designator to complete part number: J= ±5%, K= ±10%, M= ±20
*Add tolerance designator to complete part number: J= ±5%, K= ±10%, M= ±20
 
© Copyright 2019 Electrocube, Inc.