Electrocube, design manufacturer of electronic components

Double Metallized Polypropylene

985B Series Film Capacitors

High Current

The Electrocube 985B series is a rugged, non-inductively wound double metallized high current capacitor. Proudly made in the U.S. with proprietary techniques, it offers high frequency operation, high current and low ESR in a miniature package. The 985B series is part of Electrocube’s designated line of capacitors specially designed and optimized for high temperature, high current applications subject to AC and pulsing signals. Able to handle high surge currents without degrading, this series is an excellent replacement for electrolytic capacitors. Engineers prefer the 985B series high-grade materials, design and manufacturing for high-powered inverter applications; rugged military and commercial land and sea applications; AC power, solar-, wind-, and steam-power generation, and avionics, electric vehicles and robotics.

985B Series Oval shape with axial-lead wrap and fill. Also available in round configuration
985B Series
Oval shape with axial-lead wrap and fill. Also available in round configuration

Features

  • Protective clear wrap offered on all wrap and fill units
  • Extended electrode construction and standard tin-coated, oxygen-free solid copper leads
  • Tolerances available to ±1%
  • Epoxy Resin endfills meet or exceed flammability requirements of UL94V0
  • Compliance and certification to worldwide and other environmental standards available upon request; RoHS and Non-RoHS available on most units
  • May be used for frequencies up to 100 KHz
  • Customizable insulating sleeves, mountings, special terminals, non-standard leads, circuit connections and other hardware
  • Assorted styles, ratings and customization for unusual requirements necessitated by special circuit applications (including higher IR or lower DF)
  • Dimensional variations for all mfd. values available with same volume

Specifications

Temperature range

  • -55°C to +105°C at rated voltage

Dielectric strength

  • Will withstand 150% of DC rated voltage for a period not to exceed 1 minute at temperature of 25 °C
  • Current limited to 5 mA

DC life test

  • Will withstand 140% of the DC rated voltage at 85°C for 250 hours with not more than 1 failure in 12 permitted
  • Current limited to 5 mA
  • Additional life test details available

    Dissipation factor

    • Will not exceed 1.0% at 25°C

    Dielectric absorption

    • Will not exceed 0.1% at 25°C per MIL-C-19978

    Acceptance criteria

    • Measurement frequency for capacitance and dissipation factor will be 1,000 Hz
    * Add tolerance designator to complete part number: F = ±1%, G = ±2%, J = ±5%, K = ±10%, M = ±20%
    * Add tolerance designator to complete part number: F = ±1%, G = ±2%, J = ±5%, K = ±10%, M = ±20%
    contact us   |   privacy policy   |   terms of use