This capacitor series was designed for High Voltage AC and pulsing applications. The units are rated for 15,000 VDC/2,500 VAC & 30,000 VDC / 4,500 VAC @ 60Hz.
All capacitors feature extended electrode construction and standard tin-coated copper leads. Nickel, copperweld, dumet and other special leads are available.
Protective clear wrap is offered.
The potting material and endfills of Electrocube’s capacitors meet or exceed the flammability requirements of UL94VO.
Dimensional variations for all MFD values are available with the same volume to meet your design requirements.
Specifications for 925D Series Metallized Polypropylene Capacitors Data Sheet
|Temperature:||-40ºC to +85ºC|
|Dielectric Voltage Test:||Will withstand an application 120% of
rated DC voltage for 1 minute.
|Dissipation Factor:||Shall not exceed 0.1% at 25ºC.|
|Dielectric Absorption:||Shall not exceed 0.1% at 25ºC per MIL-C-19978.|
|Acceptance Criteria:||Measurement frequency for capacitance
and dissipation factor shall be 1000Hz.
|Insulation Resistance:||> 30,000 MEG Ω @ 100 VDC, 25ºC for 1 minute.|
|Resistance to Soldering Heat:||Bath temperature maximum
260ºC duration 10 seconds Maximum.
All Electrocube film capacitors have endfills and tape that meet or exceed the flammability requirements of UL94V0.